V2350a functionsFirst-class ALPS ® potentiometer and ELMA ® switches guarantee a long, trouble-free operation, even if they are used continuously. To adapt the V2350a to different studio environments a level adjustment can be done with a variable resistor on the printboard.
• Impedance potentiometer for optimal adjustment of low-Z signal sources
• Backlit range switch to increase the impedance adjustment
• 11 step mode switch to select the source and adjust the impedance
• 41 step pot with ¼ dB resolution
The V2350a is an amplifying module for a wide range of signal sources with low impedance. Whether balanced, unbalanced, high or low level, with the V2350a all input signals can be smoothly adapted to studio level.
An essential role plays the continuous impedance potentiometer with which an optimal adjustment of signal sources with 10 Ohm to 2.5 kOhm can be done. The impedance pot works logarithmically and its impact can be increased by a factor of four up to 10 kOhm.
The central mode switch of the V2350a guarantees fast und comfortable work, because it caters for a selection of the source, as well as for the amplification in steps of 10 dB. With the separate level control an additional fine adjustement within these 10 dB steps can be made in ¼ steps.
The V2350a module is matched with the api® 500 series and can be integrated in any configuration in every api® environment.